P.O.Box 1108, MORLEY, 6062, Western Australia
Tel: +61 8 9370 5533 Fax: +61 8 9467 6146

We now accept payments via:
AND

Click for more info

About our products

Jenal Communications are manufacturers of add-on signalling modules for the radio communications industry. We specialise in retrofit Selcall units for the HF radio market, including units which can interface to GPS devices and be used for vehicle location and tracking, as well as signalling and control modules.

Below are images and brief descriptions of our products. Click on an image below or on one of the buttons to the left to get more information about any particular product.

We are proud of our products and service and we welcome any feedback, be it positive or negative, to help us maintain our standard. If you wish to make any comments or suggestions please send us a message by clicking HERE.

Available again for a limited time!

SC2 - Selcall/Telcall microphone

These are our flagship products, with well over a thousand units installed worldwide by a wide range of users from radio enthusiasts to NGO's and Government Departments.

Both these units have been designed to be able to be interfaced to virtually any HF radio with the minimum of modifications required.

All configuration programming of the microphone's selcall funtions is carried out from the microphone's keypad. In use the selcall format can be changed by using the keypad (if this function is enabled) allowing the unit to be used in both Barrett and Codan format systems.

SC90 selcall board for use with Kenwood TK-90 radios

Add Barrett and Codan selcall capabilities to your TK-90 radio. Suitable for use in Automatic Vehicle Location and tracking systems.

CM1 - Replacement microphone for Codan 9323 and similar radios

A plug in replacement microphone functionally similar to the standard Codan microphone. Spares are also available for this microphone as follows:

DMINS - Dynamic Mic Insert (limited stock)

NEW! CM2 - Low cost replacement microphone for Codan 9323 and similar radios

A plug in replacement microphone functionally similar to the standard Codan microphone. Spares are also available for this microphone as follows:

DMINS - Dynamic Mic Insert (limited stock)

NEW! DM1 - Low cost DTMF microphone

Originally designed for the Tait 2000 series radios but suitable for use with many different radios. Has a dynamic microphone insert.

FA1 - FleetSync Adapter for Kenwood Radios

Eight opto-isolated inputs and eight change-over relay outputs make for easy remote control using the Kenwood Fleetsync Digital Messaging System.

This unit can be used for a variety of tasks, such as extending a burglar alarm system onto an existing two way radio network or remote access control via the two way network.

SC12 - Aircraft Selcall/ Telcall unit

Designed to be mounted into a 5 inch Dzus rack these units can be manufactured to your special order.

These units do not use the ICAO Aircraft Selcal system.

SC51 - Internal mount Selcall/Telcall/GPS unit

Suitable for use in Automatic Vehicle Location and tracking systems.

This unit can be used to initiate selcalls, telcalls, beacons and emergency calls by using a DTMF microphone or it can be wired up to transmit a GPS emergency location call by pressing a single press button.

NOW WITH 10 STORED MEMORY CALLING FEATURE

CW-ID 1 - Repeater/Beacon Controller ID unit

Suitable for controlling a Repeater or a Beacon with CW ID.

This unit can be used to connect two radios together to construct a repeater. It offers various options, such as Anti-Kerchunk, Courtesy Tone (Roger Beep), CW Identification and a Transmit Time-Out timer.

DT-8 DTMF controlled relay unit

Control 8 change over relay outputs using a DTMF keypad.

Designed specifically for use in radio networks the DT-8 can be controlled using a radio fitted with a DTMF keypad. The DT-8 has programmable lock and unlock codes as well as the option to automatically lock after a command has been received or after a preset time.

Information on discontinued products

SC2 selcall/telcall and SC3 selcall only microphones

SC32 Selcall/Telcall Decoder/Display

SC33 Remote Control/Display unit

CT1 Battery Cut-off Timer unit

Jenal Communications design and manufacture a wide range of radio related devices including units which use the standard HF selcall and telcall signalling as used by Barrett, Codan, Icom and Q-Mac. Thousands of these products are being used all around the world by Governments, NGOs, Commercial organisations and Amateur Radio operators. We also manufacture a number of devices which use the common DTMF (or touchtone) signalling system.

Last modified: 16 July 2011.

P.O.Box 1108, MORLEY, 6062, Western Australia Tel: +61 8 9370 5533 Fax: +61 8 9467 6146

We now accept payments via: AND Click for more info