P.O.Box 1108, MORLEY, 6062, Western Australia
Tel: +61 8 9370 5533 Fax: +61 8 9467 6146
Click here to go to our home page

Send us an e-mail

SC2 Selcall/Telcall Microphone

SC12 Aircraft unit

SC51 Internal vehicle tracking/selcall unit

SC90 Selcall unit for Kenwood TK-90 radios

CM1 Replacement mic for Codan 9323

CM2 Replacement mic for Codan 9323

DM1 DTMF Keypad microphone

CWID1 Repeater/Beacon controller

DT8 DTMF controlled relay unit

FA1 Fleetsync controlled interface unit

Download manuals here

Spares

Download schematics here

Find radio modifications here

We now accept payments via:
AND
Acceptance Mark
Click for more info


Definition: Selcall
Definition: Telcall

Discontinued product - for information only

SC 32 Selcall/Telcall Decoder/Display

The SC 32 is a handheld unit with a built-in 2 line by 16 character LCD display which will receive, decode and display selcalls, telcalls,beacon requests and hang-up commands in the three common formats (Barrett, Codan and WA2).

The received signal is fed into the SC 32 either from it's internal microphone or through a jack socket and lead. Power for the SC 32 is supplied either from an internal 9 volt Nicad or from an external power supply. There is an basic internal charger circuit to recharge the Nicad when the SC 32 is fed from an external source.

An internal piezo alarm be programmed to be triggered when receiving a selcall TO or FROM a specific selcall ID. This ID can contain wildcards allowing the alarm to operate on a range of selcall IDs. Using the alarm functions enables a channel to be monitored for selcalls either going to or origating from a particular radio.

For example programming an ID of 12?4 will enable the alarm for the following ID's: 1204, 1214, 1224, 1234, 1244, 1254, 1264, 1274, 1284 and 1294. While programming an ID of say 87?? will enable the alarm for all selcall ID numbers between 8700 and 8799.

The display is in the format:
1
2
3
4
 -
F
m
 -
8
4
2
1
-
C
O
D
0
8
9
3
7
0
5
5
3
3
-
-
-
-
-
-

Which translates into:
Telcall to
1234
 
from
8421
 
format
Codan
 
to telephone number
0893705533

Selcall, Selcal, Telcall, Telcal, Decoder, Display Click here for the SC32 Manual

SPECIFICATIONS

Operating Power: 13.8 Vdc nominal, approx 12mA idle (~26 mA with Nicad charging)
Functions Available: Programmable alarm on selcalls TO or FROM a particular selcall ID. Wildcards allows the alarm to be enabled for a range of selcall IDs.
Size: 5.7in Wide x 2.4in High x 1.2in Deep
143mm Wide x 60mm High x 30mm Deep
Specifications subject to change without prior notification

For pricing and additional information:

just call or send us an e-mail
Jenal Communications design and manufacture a wide range of radio related devices including units which use the standard HF selcall and telcall signalling as used by Barrett, Codan, Icom and Q-Mac. Thousands of these products are being used all around the world by Governments, NGOs, Commercial organisations and Amateur Radio operators. We also manufacture a number of devices which use the common DTMF (or touchtone) signalling system.

Last modified: 30 June 2011.